| |
Semiautomatic
Binding Machine |
| |
|
R-422 |
Semi-Automatic
Book Binding Machine for big diameters. Our best semi-automatic
binding machine.
The special system of closing gives superior quality and speed
in the binding of all diameters, but the system is particularly
suitable for the big (and difficult) diameters. |
|
| |
HOW
IT WORKS |
| |
|
The
operator must set up the computer with the basic inputs: pitch,
diameter, n° of loops. He then must place the product
under the carter and press the foot-switch. |
|
The
machine automatically unwinds the spool, cuts the length in
the desired number of loops and carries it on a magnetic oscillating
arm. The same "feeding arm" puts each length into
the inferior part of the binding tool, where it is strongly
held, thanks to a set of micro teeth. |
|
The
R422 then closes "like a pincer" the inferior and
superior part of the tool, so that the spiral is pushed into
the holes of the product and the points and tails are closed
simultaneously. |
|
The
result is a superior quality and fast binding even with big
diameters and even if the sheets are not perfectly aligned. |
|
FEATURES |
|
|
Using
Stuebing wire spools with diameters from 1/4" to 1"
for a maximum binding thickness of 24 mm (check binding table).
|
|
Maximum
Binding length: 420 mm |
|
Minimum
Binding length: 50 mm |
|
Each
diameter uses dedicated binding tools. |
|
Footswitch
controlled. |
|
Machine
speed is over 1500 cycles per hour. Effective productivity
depends on operator skill and on the products' features. |
| |
COMPLETE
WITH |
|
|
One
binding tool according to your choice. |
|
Automatic
spool unwinder and integrated loose-paper rewinder. |
|
Microprocessors
controlled operations. |
|
Total
bindings counter. |
|
Kit
of adjustment. |
| |
OPTIONALS |
| |
|
Device
for bending spiral's tails. |
|
Bindings
tool specific for each diameter. |
| |
